This meter measures the current not with a shunt, but with a hall-effect current sensor. It sets up a WiFi network using SoftAP, the user can connect to the website where the voltage and current can be viewed in a real-time graph. It also logs this data to an integrated SD-card.
- High current of 65 Amps (limited by connector)
- ACS758xCB Hall-effect current sensor. 100μΩ, 100Amp. Galvanically isolated.
- XT60 connectors for use with a lot of different devices.
- 50V max
- SoftAP WiFi
- Website with real-time current and voltage graphs
- USB-C for power on the PCB
- Support for SSD1306 OLED display
- ESP12F microcontroller
- SD-Card for data logging
- Fully open source!
This page is intended as a personal portfolio, and therefore the author cannot be held responsible for any errors. Feel free to use content from this page, provided the author is credited.